Tutorial

How To Set Up an NFS Mount on Ubuntu 12.04

Published on September 17, 2012
How To Set Up an NFS Mount on Ubuntu 12.04
Not using Ubuntu 12.04?Choose a different version or distribution.
Ubuntu 12.04

Status: Deprecated

This article covers a version of Ubuntu that is no longer supported. If you are currently operate a server running Ubuntu 12.04, we highly recommend upgrading or migrating to a supported version of Ubuntu:

Reason: Ubuntu 12.04 reached end of life (EOL) on April 28, 2017 and no longer receives security patches or updates. This guide is no longer maintained.

See Instead:
This guide might still be useful as a reference, but may not work on other Ubuntu releases. If available, we strongly recommend using a guide written for the version of Ubuntu you are using. You can use the search functionality at the top of the page to find a more recent version.

About NFS (Network File System) Mounts

NFS mounts work to share a directory between several virtual servers. This has the advantage of saving disk space, as the home directory is only kept on one virtual private server, and others can connect to it over the network. When setting up mounts, NFS is most effective for permanent fixtures that should always be accessible.

Setup

An NFS mount is set up between at least two virtual servers. The machine hosting the shared network is called the server, while the ones that connect to it are called ‘clients’.

This tutorial requires 2 servers: one acting as the server and one as the client. We will set up the server machine first, followed by the client. The following IP addresses will refer to each one:

Master: 12.34.56.789

Client: 12.33.44.555

The system should be set up as root. You can access the root user by typing

sudo su-

Setting Up the NFS Server

Step One—Download the Required Software

Start off by using apt-get to install the nfs programs.

apt-get install nfs-kernel-server portmap

Step Two—Export the Shared Directory

The next step is to decide which directory we want to share with the client server. The chosen directory should then be added to the /etc/exports file, which specifies both the directory to be shared and the details of how it is shared.

Suppose we wanted to share two directories: /home and /var/nfs.

Because the /var/nfs/ does not exist, we need to do two things before we can export it.

First, we need to create the directory itself:

mkdir /var/nfs/

Second, we should change the ownership of the directory to the user, nobody and the group, no group. These represent the default user through which clients can access a directory shared through NFS.

Go ahead and chown the directory:

chown nobody:nogroup /var/nfs

After completing those steps, it’s time to export the directories to the other VPS:

nano /etc/exports

Add the following lines to the bottom of the file, sharing both directories with the client:

/home           12.33.44.555(rw,sync,no_root_squash,no_subtree_check)
/var/nfs        12.33.44.555(rw,sync,no_subtree_check)

These settings accomplish several tasks:

  • rw: This option allows the client server to both read and write within the shared directory
  • sync: Sync confirms requests to the shared directory only once the changes have been committed.
  • no_subtree_check: This option prevents the subtree checking. When a shared directory is the subdirectory of a larger filesystem, nfs performs scans of every directory above it, in order to verify its permissions and details. Disabling the subtree check may increase the reliability of NFS, but reduce security.
  • no_root_squash: This phrase allows root to connect to the designated directory

Once you have entered in the settings for each directory, run the following command to export them:

exportfs -a

Setting Up the NFS Client

Step One—Download the Required Software

Start off by using apt-get to install the nfs programs.

apt-get install nfs-common portmap

Step Two—Mount the Directories

Once the programs have been downloaded to the the client server, create the directories that will contain the NFS shared files

mkdir -p /mnt/nfs/home
mkdir -p /mnt/nfs/var/nfs

Then go ahead and mount them

mount 12.34.56.789:/home /mnt/nfs/home
mount 12.34.56.789:/var/nfs /mnt/nfs/var/nfs

You can use the df -h command to check that the directories have been mounted. You will see them last on the list.

df -h
Filesystem             Size  Used Avail Use% Mounted on
/dev/sda                20G  948M   19G   5% /
udev                   119M  4.0K  119M   1% /dev
tmpfs                   49M  208K   49M   1% /run
none                   5.0M     0  5.0M   0% /run/lock
none                   122M     0  122M   0% /run/shm
12.34.56.789:/home      20G  948M   19G   5% /mnt/nfs/home
12.34.56.789:/var/nfs   20G  948M   19G   5% /mnt/nfs/var/nfs

Additionally, use the mount command to see the entire list of mounted file systems.

mount

Your list should look something like this:

/dev/sda on / type ext4 (rw,errors=remount-ro,barrier=0) [DOROOT]
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
rpc_pipefs on /run/rpc_pipefs type rpc_pipefs (rw)
12.34.56.789:/home on /mnt/nfs/home type nfs (rw,vers=4,addr= 12.34.56.789,clientaddr=12.33.44.555)
12.34.56.789:/var/nfs on /mnt/nfs/var/nfs type nfs (rw,vers=4,addr=12.34.56.78,clientaddr=12.33.44.555)

Testing the NFS Mount

Once you have successfully mounted your NFS directories, you can test that they work by creating files on the Client and checking their availability on the Server.

Create a file in each directory to try it out:

touch /mnt/nfs/home/example /mnt/nfs/var/nfs/example

You should then be able to find the files on the Server in the /home and /var/nfs directories.

ls /home
ls /var/nfs/

You can ensure that the mount is always active by adding the directories to the fstab file on the client. This will ensure that the mounts start up after the server reboots.

nano /etc/fstab
12.34.56.789:/home  /mnt/nfs/home   nfs      auto,noatime,nolock,bg,nfsvers=3,intr,tcp,actimeo=1800 0 0
12.34.56.789:/var/nfs  /mnt/nfs/var/nfs   nfs     auto,noatime,nolock,bg,nfsvers=3,intr,tcp,actimeo=1800 0 0

You can learn more about the fstab options by typing in:

man nfs

Any subsequent restarts will include the NFS mount—although the mount may take a minute to load after the reboot

You can check the mounted directories with the two earlier commands:

df -h
mount

Removing the NFS Mount

Should you decide to remove a directory, you can unmount it using the umount command:

cd
sudo umount /directory name

You can see that the mounts were removed by then looking at the filesystem again.

df -h

You should find your selected mounted directory gone.

By Etel Sverdlov

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

This is missing in tutorial: server $ sudo service nfs-kernel-server start client $ sudo chmod og+w /mnt/nfs/home

now it mounts… :P

DO, please add this to the manual:

server

$ sudo service nfs-kernel-server start

client

$ sudo chmod -R og+w /mnt/nfs/*

Is this supposed to work just like that? Without opening some ports on the server?

Excellent tutorial. However I have one question. My goal is: to isolate the file structure of use upload-able content from the application code to allow better scaling of the application using load balancers etc.

Will using 2 droplets to achieve this NFS setup result in much latency or increase in load time for the additional trip from one node to the other?

Thanks, Stefan

Getting a “An error occurred while mounting 0.” whenever I reboot now. Any ideas?

Solving my own post… There must be some kind of delay with the directory listings … After refreshing the folder a couple of times from the windows box the files that were moved via rsync were removed out of the list.

Further expansion of previous post…

The source box shows the files as gone and removed using ls in shell…

Windows 7 samba shows the files still there and i can copy them even though linux shows they are gone…

What gives lol

Tutorial worked like a charm, but when using rsync to move files from one server to another, the files aren’t removed from the source server… for example: rsync -avh --remove-source-files --progress /mnt/nfs/xfer/series /srv/fs1/work/iso

I’d been using cifs for this but it was painfully slow on linux to linux … NFS is much faster.

I’ve got the nfs mount as follows in fstab:

192.168.0.50:/srv/xfer /mnt/nfs/xfer nfs auto,noatime,nolock,bg,nfsvers=3,rsize=32768,wsize=32768,intr,tcp,actimeo=1800 0 0

the export from the nfs server is:

/srv/xfer 192.168.0.42(rw,sync,no_root_squash,no_subtree_check)

all folders and files within /srv/xfer are owned by nobody with nogroup

Any ideas?

Thanks!

Kamal Nasser
DigitalOcean Employee
DigitalOcean Employee badge
May 27, 2013

@kourtzis What’s the output of ‘uname -rsi’?

:-( On the server: $ service nfs-kernel-server start FATAL: Could not load /lib/modules/3.8.0-19-generic/modules.dep: No such file or directory

  • Not starting NFS kernel daemon: no support in current kernel.

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more