Tutorial

How To Set Up SSH Keys on Ubuntu 12.04

How To Set Up SSH Keys on Ubuntu 12.04
Not using Ubuntu 12.04?Choose a different version or distribution.
Ubuntu 12.04

Introduction

The Secure Shell Protocol (or SSH) is a cryptographic network protocol that allows users to securely access a remote computer over an unsecured network.

Though SSH supports password-based authentication, it is generally recommended that you use SSH keys instead. SSH keys are a more secure method of logging into an SSH server, because they are not vulnerable to common brute-force password hacking attacks.

Generating an SSH key pair creates two long strings of characters: a public and a private key. You can place the public key on any server, and then connect to the server using an SSH client that has access to the private key.

When the public and private keys match up, the SSH server grants access without the need for a password. You can increase the security of your key pair even more by protecting the private key with an optional (but highly encouraged) passphrase.

Note: If you are looking for information about setting up SSH keys in your DigitalOcean account, please refer to our DigitalOcean product documentation on SSH Keys

Step 1 — Creating the Key Pair

The first step is to create a key pair on the client machine. This will likely be your local computer. Type the following command into your local command line:

  1. ssh-keygen -t ed25519
Output
Generating public/private ed25519 key pair.

You will see a confirmation that the key generation process has begun, and you will be prompted for some information, which we will discuss in the next step.

Note: if you are on an older system that does not support creating ed25519 key pairs, or the server you’re connecting to does not support them, you should create a strong rsa keypair instead:

  1. ssh-keygen -t rsa -b 4096

This changes the -t “type” flag to rsa, and adds the -b 4096 “bits” flag to create a 4096 bit key.

Step 2 — Specifying Where to Save the Keys

The first prompt from the ssh-keygen command will ask you where to save the keys:

Output
Enter file in which to save the key (/home/sammy/.ssh/id_ed25519):

You can press ENTER here to save the files to the default location in the .ssh directory of your home directory.

Alternately, you can choose another file name or location by typing it after the prompt and hitting ENTER.

Step 3 — Creating a Passphrase

The second and final prompt from ssh-keygen will ask you to enter a passphrase:

Output
Enter passphrase (empty for no passphrase):

It’s up to you whether you want to use a passphrase, but it is strongly encouraged: the security of a key pair, no matter the encryption scheme, still depends on the fact that it is not accessible to anyone else.

Should a private key with no passphrase fall into an unauthorized user’s possession, they will be able to log in to any server you’ve configured with the associated public key.

The main downside to having a passphrase — typing it in — can be mitigated by using an ssh-agent service, which will temporarily store your unlocked key and make it accessible to the SSH client. Many of these agents are integrated with your operating system’s native keychain, making the unlocking process even more seamless.

To recap, the entire key generation process looks like this:

  1. ssh-keygen -t ed25519
Output
Generating public/private ed25519 key pair. Enter file in which to save the key (/home/sammy/.ssh/id_ed25519): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/sammy/.ssh/id_ed25519 Your public key has been saved in /home/sammy/.ssh/id_ed25519.pub The key fingerprint is: SHA256:EGx5HEXz7EqKigIxHHWKpCZItSj1Dy9Dqc5cYae+1zc sammy@hostname The key's randomart image is: +--[ED25519 256]--+ | o+o o.o.++ | |=oo.+.+.o + | |*+.oB.o. o | |*. + B . . | | o. = o S . . | |.+ o o . o . | |. + . ... . | |. . o. . E | | .. o. . . | +----[SHA256]-----+

The public key is now located in /home/sammy/.ssh/id_ed25519.pub. The private key is now located in /home/sammy/.ssh/id_ed25519.

Step 4 — Copying the Public Key to Your Server

Once the key pair is generated, it’s time to place the public key on the server that you want to connect to.

You can copy the public key into the server’s authorized_keys file with the ssh-copy-id command. Make sure to replace the example username and address:

  1. ssh-copy-id sammy@your_server_address

Once the command completes, you will be able to log into the server via SSH without being prompted for a password. However, if you set a passphrase when creating your SSH key, you will be asked to enter the passphrase at that time. This is your local ssh client asking you to decrypt the private key, it is not the remote server asking for a password.

Step 5 — Disabling Password-based SSH Authentication (Optional)

Once you have copied your SSH keys onto the server, you may want to completely prohibit password logins by configuring the SSH server to disable password-based authentication.

Warning: before you disable password-based authentication, be certain you can successfully log onto the server with your SSH key, and that there are no other users on the server using passwords to log in.

In order to disable password-based SSH authentication, open up the SSH configuration file. It is typically found at the following location:

  1. sudo nano /etc/ssh/sshd_config

This command will open up the file within the nano text editor. Find the line in the file that includes PasswordAuthentication (or create the line if it doesn’t exist), make sure it is not commented out with a # at the beginning of the line, and change it to no:

/etc/ssh/sshd_config
PasswordAuthentication no

Save and close the file when you are finished. In nano, use CTRL+O to save, hit ENTER to confirm the filename, then CTRL+X to exit.

Reload the sshd service to put these changes into effect:

  1. sudo systemctl reload sshd

Before exiting your current SSH session, make a test connection in another terminal to verify you can still connect.

Conclusion

In this tutorial we created an SSH key pair, copied our public key to a server, and (optionally) disabled password-based authentication completely.

For more information about SSH and the SSH service, including how to set up multifactor authentication, please read our related tutorials:

We’ve made it super easy to add SSH Keys to your new or existing DigitalOcean virtual machines.

Learn more here

About the authors


Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Dear Digital Ocean. You guys make the best tutorials. Thank you so much.

If you don’t have ssh-copy-id you can use the following command: cat ~/.ssh/id_rsa.pub | ssh user@machine “cat >> ~/.ssh/authorized_keys”

Why enable root login over ssh at all? Add your normal admin user to the admin group, or add an entry to the /etc/sudoers file (as described in https://www.digitalocean.com/community/articles/how-to-add-and-delete-users-on-ubuntu-12-04-and-centos-6) and use sudo. If you need full root login, then just use sudo su - root

When trying to connect, it asks me for a password and I did not enter one upon configuration. I guess I’m locked out of my virtual machine.

Hi,

there should be an article that explains how to setup users + sudo + SSH key authentication and disable password authentication altogether + fail2ban + disable root login

Just to keep it simple for people who don’t really know what they are doing :)

Totally not working for me. I’m rebuilding my virtual machine for the second time.

I cannot finish step 3. I get blah blah blah port 22: Connection refused

I changed the port as recommended by a previous tutorial.

For those who are trying to add a new key to an existing droplet - READ THIS!!!

If you are getting the “Permission denied (publickey)” when trying to copy your public key to the server, you likely have password authentication disabled in your droplet.

How to fix this: Log in to your DigitalOcean account and open the console for the drop you are trying to access. While inside the console do the following:

sudo vim /etc/ssh/sshd_config 

Scroll down to the very bottom and look for the following directives:

UsePAM yes
IgnoreUserKnownHosts no 
PasswordAuthentication no 

If UsePAM is set to ‘yes’ and PasswordAuthentication is set to ‘no’ change those to the opposite. It should read the following:

UsePAM no
IgnoreUserKnownHosts no 
PasswordAuthentication yes 

Then press esc, type : (colon), and type wq and hit enter
This will quit vim editor.

Now type reload ssh

Now go back to your terminal or putty and pick up at the step where it has you copying your local rsa public key to the server. You should now be presented with a request for a password instead of public key denied. Type in your droplet password and hit enter. You should know be inside your server.

Now you can change those settings back from Putty or Terminal by typing the following:

sudo vim /etc/ssh/sshd_config 

Change the directives back to what they were and press esc, type : (colon), and type wq and hit enter

reload ssh Again.

Now you can quit the session by typing exit and try to login with just ssh by typing: ssh username@dropletIP.

Now you should be able to access your server via SSH with your newly created SSH key!

This was a PITA to figure out, but that is what got it all done for me.

On a Mac you first need to do this brew install ssh-copy-id

If you don’t have ssh-copy-id but you have brew (osx)

brew install ssh-copy-id
ssh-copy-id user@123.45.56.78

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more